|
|
|
loveM7
|
|
#1
Posted
:
Tuesday, August 28, 2007 8:26:00 PM
|
|
|
Rank: Advanced Member
Posts: 294
Points: 1,191
|
| An excellent product This tree of the press has great features and is a quality built-in-the-USA unit. I particularly like the hole in the ram so that the bubbles with different shapes can be attached. It uses a magnet to hold it in place. I made my own commitment to use it as a leather stamping press, and it works fine. I found that if you create your own cutting-edge tool you need to properly copy those provided so that the length of the mounting hole portion does not extend further and come into contact with the magnet. I would recommend this product to anyone.Palmgren 61101 AP10 1-Ton Manual Arbor Press - 1-ton manual arbor press delivers heavy force needed for riveting, squeezing, punching, bending, and other pressing applications
- Removable machined steel anvil provides accurate work support in 4 slot positions
- Sturdy cast-iron construction
- Equipped with a hand wheel to perform light and quick press work
- Base drilled for mounting on bench or pedestal.
|
| Brand | Palmgren | | Publisher | Palmgren |
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
professor
|
|
#2
Posted
:
Saturday, March 15, 2008 8:26:00 PM
|
|
|
Rank: Advanced Member
Posts: 346
Points: 1,038
|
Krillion has local Palmgren Drill Press or Mortiser 61101 - 1 Ton Arbor Press. Find a great price to buy Palmgren Drill Press or Mortiser 61101 - 1 Ton Arbor Press in stores near Palmgren 61101 AP10 1-Ton Manual Arbor Press - Benchtop Drill Presses - Drill Presses - Shop for Woodworking Tools, Plans, Finishing and Hardware online at Rockler Woodworking and Palmgren 61101 AP10 1-Ton Manual Arbor Press - Benchtop Drill Presses - Drill Presses - Tools, Hardware & Home Improvement. Machinery and Tools. Palmgren 61101 AP10 1-Ton Manual Arbor Press by Palmgren Krillion has local Palmgren Drill Presses and Mortisers with prices and Palmgren Drill Press or Mortiser Model: 61101 DELTA DP300L 12-Inch TwinLaser Crosshair Drill Press Delta: Palmgren 61101 AP10 1-Ton Manual Arbor Press New power, electrical or hand tools Rockwell, Fein MultiMaster, Makita Delta 15-233 3/4 Horsepower 15-Inch Floor Drill Press ~ Delta Modell 15-233 - 77.00 : Palmgren 61101 AP10 1-Ton Manual Arbor Press ~ Palmgren Modell 61101 JET 354165 JDP-15M 3/4-Horsepower 15-Inch Bench Drill Press • Palmgren 61101 AP10 1-Ton Manual Arbor Press • Palmgren 61051 AP05 1/2-Ton Manual Arbor Press
|
|
|
|
blahblah
|
|
#3
Posted
:
Sunday, September 21, 2008 8:26:00 PM
|
|
|
Rank: Advanced Member
Posts: 304
Points: 912
|
Pretty darned good .......I know, I know, he will talk about the cast again. Sorry folks, this is the only way forward. This small device table is ideal for small work ... bearings, pins, roll pins, etc. can not beat the price either.
|
|
|
|
doityourself
|
|
#4
Posted
:
Wednesday, December 10, 2008 8:26:00 PM
|
|
|
Rank: Advanced Member
Posts: 278
Points: 834
|
Excellent quality arbor press.Much, much better than the typical generic Chinese made arbor press. Good fit and finish, including accessories that most do not. Was very pleasantly surprised by the quality and value. Highly recommended.
|
|
|
|
dad777
|
|
#5
Posted
:
Saturday, January 17, 2009 8:26:00 PM
|
|
|
Rank: Advanced Member
Posts: 338
Points: 1,014
|
Best 1 ton tree that I sawTree, with three punches / bits where others do not. The ram is counterbored and a magnet glued into the bore to accept and organize the bits. Nice touch. Remember if you make your own fists to not be left on the bottom of the magnet, magnets sinceand are fragile.
As arrived, the press came with a wheel on the handle it in front of the bar handle. View 1 / 2 ton of the press of a photo. It is a surprise, but I find that I never use wheel race.
In total, a little press.
|
|
|
|
Guest
|